Accent walls are a fantastic way to bring personality to a room, especially in spaces like dining rooms where you want an inviting vibe. My mom’s dining room is part of an open-concept layout, and while she’d already painted the wall in a moody tone, she wanted something extra. We decided on a beginner-friendly accent wall design that wouldn’t overwhelm the room or require a renovation.

I’ve broken down the step-by-step below and included the items that I used (with links, where possible). If you prefer to ‘watch rather than read’ I’ve got the video below also! 

Post may include affiliate links, and I may earn a small commission when readers purchase items through my links.

DIY Supplies You’ll Need

Here’s everything we used for this beginner-friendly DIY accent wall project:

1×2 pine boards – enough to cover the wall based on your desired design
Brad nail gun – for quick, secure attachment
Miter saw – to cut precise 45-degree angles
Painter’s tape – optional, to protect walls or ceilings
Construction adhesive – optional, for extra hold
Caulk or wood filler – to fill in gaps and nail holes
Primer and paint – for a smooth, cohesive finish

Here’s the video walkthrough:

In the video below, I talk through what we did to complete this accent wall project. Below that, are the steps broken down within the blog post. 

Here’s the step-by-step:

Here’s everything we did to complete this simple and affordable accent wall project.

Step 1: Preparing the Wall

Since my mom had already painted her wall, we skipped this step. But if you’re starting from scratch, consider smoothing out any wall texture (like orange peel) with joint compound for an extra-polished look. This is optional but can make a difference for a perfectly smooth finish.

Step 2: Planning the Accent Wall Pattern

To keep this beginner-friendly, we went with an abstract design that didn’t require a strict pattern or measuring for each piece. I sketched out a general plan with my mom and sister, but we mainly followed our instincts as we placed each board. This approach is perfect for beginners—it lets you be flexible and make adjustments as you go.

Step 3: Cutting and Placing the Boards

Using the miter saw, I cut each 1×2 board at a 45-degree angle. This cut makes it easy to fit pieces together for a clean look. If you’re new to angles, think of a 45-degree cut as half of a right angle, which creates a professional, flush finish.

Step 4: Attaching the Boards

We attached the boards with a brad nail gun, but if you’re planning to keep your wall long-term, you could add a bit of construction adhesive for extra hold. Just be cautious; adhesive can be tough to remove if you decide to take down the accent wall in the future.

Step 5: Finishing Touches – Filling, Sanding, and Painting

After attaching the boards, we filled any gaps, seams, and nail holes with caulk or wood filler. Once everything dried, we lightly sanded for a smooth finish. Finally, we painted the wall using a paint with primer included for a seamless look that tied the room together beautifully.

Tips for a Successful Beginner-Friendly DIY Accent Wall

• Stay Flexible: Adjust your pattern as you go. Step back often to make sure the design looks good from a distance.
• Use Painter’s Tape: Tape off areas like the ceiling or adjoining walls to keep paint where it belongs.
• Avoid Too Much Adhesive: If you’re unsure about keeping the wall, stick with nails only or use adhesive sparingly.

Final Thoughts: A Budget-Friendly Accent Wall Anyone Can Do!

This DIY accent wall project was quick, affordable, and fun! If you’re a beginner looking for a way to transform your space without spending a fortune, this project is for you. With some pine boards and a little creativity, you can give any room a custom look in no time.

For a closer look at each step, check out the full YouTube video where I take you through the process in real-time. Don’t forget to visit the blog for more beginner-friendly DIY home decor ideas!